|
PENTENS T-007 4kg Cement Modifier Waterproof Primer
PENTENS T-007 4kg Cement Modifier Waterproof Primer
PENTENS T-007 4kg Cement Modifier Waterproof Primer
PENTENS T-007 4kg Cement Modifier Waterproof Primer
PENTENS T-007 4kg Cement Modifier Waterproof Primer
PENTENS T-007 4kg Cement Modifier Waterproof Primer
PENTENS T-007 4kg Cement Modifier Waterproof Primer

Share:


PENTENS T-007 4kg Cement Modifier Waterproof Primer

RM78.00

Quantity: In Stock


Quantity:


** Note:
*Please Whatsapp us for building materials or bulk order, we will provide special offer for you. Thank you

Specifications

SKU: T-007 4KG

Weight(grams): 5000

Dimension: 30 cm (Length) x 30 cm (Width) x 30 cm (Height)

Pentens T-007 Cement Modifier

PENTENS T-007 is a 100% acrylic cement modifier based on a proven 100% acrylic polymer designed to improve the chemical, corrosion, moisture and salt resistance of cement renders. It is superior compared to most PVA and SBR-based modifiers because of its superior durability and resistance to hydrolysis. It has been specially formulated for use in high alkaline cement environments. Cement mortars based on PENTENS T-007 will adhere to a wide range of materials such as metals, timber, insulation foams as well as new and old concrete."

 

Advantages

- Increases durability of concrete and mortars.

- Waterproof.

- Suitable for use in contact with drinking water.

- Great resistance against acids, alkalis, fats & oils.

- Increases abrasion resistance.

- Increases tensile, flexural, impact and compressive strengths.

- Can be applied in thin coats.

- Excellent UV durability.

- Promotes superior adhesion compared to PVA and SBR.

 

Uses

"Not only used as waterproofing primer, but also as an additive in cement mortars, renders, patching/repair work, GRC panels and waterproof cementitious coatings"

 

Areas of application include:

- As a primer for water-based waterproofing/ flooring works

- Repairs to drinking water and waste water concrete structures

- Repairs and resurfacing of factory floors, driveways

- New and old concrete bonding agent.

- Angle fillets

- Multi-purpose adhesive

 

Instruction for Use

Surface Preparation

1. All surfaces must be clean, free from grease, oil and laitance. Remove all dirt and contaminants which might affect adhesion.

2. Substrate should be primed with a 1:3 mixture of PENTENS T-007 and water.

3. Brush on to the surface at approximate rate of 0.2kg/m².

4. Allow it to become tacky before applying the topping.

5. For porous surfaces, prime with a slurry coat. (Refer to mix recommendation)



 Inquiry - PENTENS T-007 4kg Cement Modifier Waterproof Primer