TILE ADHESIVE
Selected tag
Tag Selection
- TILE ADHESIVE (19)
- PRO Z8 (2)
- BUILDING MATERIALS (89)
- ADX (2)
- CEMENT GUM (14)
- SIKA (28)
- SIKA CERAM 188 (2)
- ECO 888 (1)
- SIMEN GUM (15)
- GUM (1)
- WATER PROOFING (78)
- PROZ (8)
- Z8 Tile Adhesive (1)
- Z8 (1)
- Obaproof F1-88 (2)
- 瓷砖胶 (1)
- F1-88 (1)
- Jubin Bersimen (1)
- WEBER (59)
- QUICKFIX (1)
- ECO FLEX (1)
- ECO FIX (1)
- TILES (28)
- BUILDING MATERIAL (3)
- ADMIXTURE (4)
- TILE GROUT (6)
- CEMENT (31)
- MAPEI (19)
- ADESILEX P8 (1)
Improved adhesion cementitious adhesive with no vertical slip and extended open time, for ceramic tiles and stone materials.
More Details...
ready to use, multi-function, synthetic latex admixture, suitable for a variety of building applications.
-
As some solid matter in webermix GT mix I may settle during storage, it is essential to stir well before use in temperature lower than 4°C
-
Allow adhesive bed to set, usually 24 – 48 hours before grouting commences. Joints must be dry and free of contaminants ie.
More Details...
- Surface Preparation : Surface to receive tiles must be well cured, dry, sound and free of contamination. When fixing onto building boards, a surface primer ie. webermix SBR is required
- Mixing : webermix admix I is ready to use; therefore does not required further addition of water. Add cement-based tile adhesive into webermix admix I.
More Details...
- Substrate must be dry, sound, flat / true & free of contaminants.
- Ceramic Tiles are to be fix dry. Do not soak in water.
- Mix weberset super star with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
More Details...
- Substrate must be dry, sound, flat / true & free of contaminants.
- Ceramic Tiles are to be fix dry. Do not soak in water.
- Mix weberset x'tra flex (LD) with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
More Details...
- Substrate must be dry, sound, flat / true & free of contaminants.
- Ceramic Tiles are to be fix dry. Do not soak in water.
- Mix weberset eco fix with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
More Details...
- Substrate must be dry, sound, flat / true & free of contaminants.
- Ceramic Tiles are to be fix dry. Do not soak in water.
- Mix weberset eco flex with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
More Details...
- Substrate must be dry, sound, flat / true & free of contaminants.
- Ceramic Tiles are to be fix dry. Do not soak in water.
- Mix weberset quickfix with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
More Details...
Description
Obaproof F1-88 is a water-resistant cement-based, thin or medium bed adhesive, suitable for fixing ceramic tiles, etc. to wall and floor, dry or wet interior and exterior areas with very good adhesion strength.
More Details...
Proz8 Title Adhesive is a one-pack permixed cenmentitious tile adhesive contaning, cement, polymers, quartz minerals and additives, for bonding ceramic tiles and mosaics to floors and walks, Proz8 Tile Adhersive is a tile adhesive with normal adhesion classification (C1) at air-cured temperature.
ECO TA-BOND 888 is water-resistant cement-based,
thin or medium bed adhesive,
suitable for fixing ceramic tiles,
etc. to wall and floor, dry or wet interior and exterior areas with very good adhesion strength.
ADVANTAGES:
- Excellent water and impact resistance.
- Non-flammable.
- Good bonding strength.
More Details...
SikaCeram®-88 is a one-pack premixed cementitious tile adhesive containing, cement, polymers, quartz minerals and additives, for bonding ceramic tiles, porcelain tiles and mosaics to floors and walls.
Easy to use with excellent workability and thixotropic consistency Very good adhesion to most common substrates (concrete, cementitious mortar, stone, bricks, etc.
More Details...
SikaCeram®-88 is a one-pack premixed cementitious tile adhesive containing, cement, polymers, quartz minerals and additives, for bonding ceramic tiles, porcelain tiles and mosaics to floors and walls.
Easy to use with excellent workability and thixotropic consistency Very good adhesion to most common substrates (concrete, cementitious mortar, stone, bricks, etc.
More Details...
- A single component thin bed polymer modified cementitious tile adhesive,specially formulated for small (≤300mm x 300mm) ceramic wall and floor tiles
More Details...
- A single component thin bed polymer modified cementitious tile adhesive,specially formulated for small (≤300mm x 300mm) ceramic wall and floor tiles
More Details...
- A single component thin bed polymer modified cementitious tile adhesive,specially formulated for small (≤300mm x 300mm) ceramic wall and floor tiles
More Details...
- A single component thin bed polymer modified cementitious tile adhesive,specially formulated for small (≤300mm x 300mm) ceramic wall and floor tiles
More Details...