Premium grade Ceramic Tile adhesive for internal and external area, mix with weber's range of Latex Admixture for Porcelain tile fixing. Substrate must be dry, sound, flat / true & free of contaminants.

Ceramic Tiles are to be fix dry.
Do not soak in water.
Mix weberset super star with water (or Latex Admixture) as perthe recommended mix ratio.
Mechanical mixing recommended.
Spread adhesive to the substrate at bed thickness of 3 - 6 mm(may vary depending on tile size & thickness) with suitablenotched trowel. Spread no more than 1m2 at a time to avoid Skin-Over. Promptly fix tiles onto adhesive bed, followed by slight twisting action to ensure good contact ie, Solid Bed Fixing.
Touch adhesive bed periodically to check for Skin-Over.
Whereadhesive bed is no longer tacky / sticky,
Skin-Over had occurred.Re-Trowel adhesive bed.
Allocate joints of approx. 2 - 3 mm wide between tiles.
Remove surplus adhesive from tile surface & joints before ithardens.
Set for 24 hours; before grouting commences. Features and benefits Premium grade C1 Tile Adhesive Excellent bond strength Contains 100% Silica sand filler Idea for swimming pool & wet area Constraints Bed
thickness : 3 - 6mm Application temperature above5°C-50°C
Open time :Approx. 15 - 20 Minute Setting time is 24 hours
Adjustability Time : 10 minutes - May vary dependingon porosity of substrate.
Mix Proportion : 1 pbw water to 3 pbw adhesive(6 - 7 ltrs Water or LatexAdmixture to 20kg webersetsuper star)
Shelf life : 6 month