WEBER

Weberfloor Colour Cement is used as a coloured topping coat to colour and enhance the appearance of plain concrete/cement-sand by mixing 1 part (25 kg) Weberfloor Colour Cement to 3 part (75 kg) silica sand to 1 part (16L) water. It is suitable as a gap filler to point joints of ceramic tiles, etc.

weberprim AAC primer is a red coloured, silicone-based, solvent-free primer. Manufactured to stringent Internal Quality Assurance System, conforming to BS 5750 : Part 2 : 1987.

weberklin is an acid-based detergent, which is designed to easy grout cleaning, remove scale deposition and grout haze. This special formulation makes no harm to ceramic mosaic tiles, aluminium and glass surfaces

• Stir weberprim super seal well, before use. This is particularly important when using weberprim super seal (matt). No further dilution is required.
• Surfaces to be treated with weberprim super seal must be dry, sound and free of contamination eg. grease, oil, dust, laitance etc.
• Apply weberprim super seal evenly with a brush or roller.

• weberprim aqua seal is supplied ready-to-use. No further dilution is required. Stir well before use.
• Preliminary testing on small trial areas is important to determine coverage and compatibility of weberprim aqua seal with materials to be treated.
• Natural Stone Slabs (& other materials) to be treated must be dry, sound and free of contamination eg.

Mix thoroughly with appropriate amount of water by using an electrical mixer.
Mixing time is 3 - 5 minutes.
Allow mixture to stand for 10 minutes for additives to dissolve.
stir again the mixture and ready to apply
Apply with steel trowel or spatula
When applying several layers, the layer underneath must be dried before spreading the subsequent layer.

• Remove dust, loose particles, grease and traces of foreign materials that may affect adhesion
• Dampen the dry absorbent surface before application of E.MIX Eco Base

Mixing & Installation

• Mix thoroughly with appropriate amount of water by using an electrical mixer.
• Mixing time is 3 - 5 minutes.

• Remove dust, loose particles, grease and traces of foreign materials that may affect adhesion
• Dampen the dry absorbent surface before application of E.MIX Eco Base

• Mix thoroughly with appropriate amount of water by using an electrical mixer.

• Substrate must be hard and free from surface contamination
• Contraction joints and cracks in the substrate which may be subject to movement after installation of EMIX Easi Screed must be maintained as joints in the new surface.
• Advisable of apply a layer of E.

• Remove loose particles, grease and traces of foreign materials, on a dry absorbent surface, surface is moistened if necessary
• mixing time of 3-7 minutes depending on the type of mixing equipment.
• Application can be done by hand and machine.
• Final surface can either be smoothened or sponge-finished..

It is a cement-based and water resistant plaster which can be used in interior and exterior conditions. It has water resistant properties and is also applicable for patching concrete as well as a masonry joint mortar for bed thickness of 5 - 15 mm.  

Specially formulated for the replacement of conventional site-mixed cement/sand plaster.

• Remove loose particles, grease and traces of foreign materials, on a dry absorbent surface, surface is moistened if necessary
• mixing time of 3-7 minutes depending on the type of mixing equipment.
• Application can be done by hand and machine.
• For smooth final finish, thin plaster are recommended on top of E.MIX EASI RENDER.

• Remove loose particles, grease and traces of foreign materials, on a dry absorbent surface, surface is moistened if necessary
• mixing time of 3-7 minutes depending on the type of mixing equipment.
• Application can be done by hand and machine.
• Final surface can either be smoothened or sponge-finished..

weberfloor 860 is a machine or hand applied self-levelling floor surfacing system formulated from special cement, aggregates, supplementary binders and chemical additives. weberfloor 860 is designed as a smooth overlayment for the use on concrete floor. Express setting time enables short waiting period.

weberfloor 810 is a machine or hand applied self-levelling floor surfacing system. It is formulated from special light colour cement and supplementary binders, together with pigment, that provide different colours to choose from. weberfloor 810 contains inorganic pigment which allows long-lasting colour.

weberfloor 550 is a machine or hand applied self-levelling floor surfacing system formulated from special cement, aggregates, supplementary binders and chemical additives. weberfloor 550 is designed as a smooth underlayment for use on epoxy coating. Under normal condition, access onto the floor is available after 2 – 3 hours.

Substrate preparation :

• Remove dust, loose particles, grease and traces of foreign materials that may affect adhesion

Mixing & Installation

• 14.4 Ltr of clean water mix with one bag (40kg) E.MIX ALC Thin Mortar
• Allow mixture to stand for 10 minutes for additives to dissolve.

• Reinforce waterproof layer
• Improve bonding of waterproof to substrates
• Use with skim coat to reinforce between 2 pieces of dry walls
• Durable with high strength

• New concrete should be cured for at least 28 days and should have a pull off strength ≥1.5 N/mm².

• New concrete should be cured for at least 28 days and should have a pull off strength ≥ 1.5 N/mm².
•  Cement or mineral based substrates must be prepared mechanically using abrasive blast cleaning or scarifying equipment to remove cement laitance and to achieve an open textured surface.

• New concrete should be cured for at least 28 days and should have a pull off strength 1.5 N/mm². Cement or mineral based substrates must be prepared mechanically using abrasive blast cleaning or scarifying equipment to remove cement laitance and to achieve an open textured surface.

• Provide a durable,flexible,seamless waterproofing tanking system
• Suitable for application & provides good adhesion to substrates
• Provides waterproofing system where Ceramic Tiles etc, can be fixed directly, using Belle's range adhesive
• User friendly, less time consuming and cleaner

wo-component with latex cementitious coating, which can be simply achieved by mixing a prepacked powder with a formulated admixture, and subsequent painting the slurry on various substrates. It protects a wide range of buildings and structural concrete components with excellent resistance to water, long-term weathering and scratching.

• Concrete, Cement-Sand Render / Screed & Masonry surface must be fully cured, dry, sound, flat or true & free of contaminants eg. grease, oil, dust, loose particles, laitance etc.
• Steel / Metal surface must be free of scales, rust, grease, oil etc.
• Damp the surface before coating and sweep the excess water to avoid ponding on the horizontal area.

• Concrete, Cement-Sand Render / Screed & Masonry surface must be fully cured, dry, sound, flat or true & free of contaminants eg. grease, oil, dust, loose particles, laitance etc.
• Steel / Metal surface must be free of scales, rust, grease, oil etc.
• Damp the surface before coating and sweep the excess water to avoid ponding on the horizontal area.

• The substrate should be clean and sound. Free from any contamination including oil, grease, laitance and dust. For maximum bonding, the surface should be roughened and dampen with clean water.
• Immediately prior to grouting remove free standing water.
• Metal surface must be free from rust, scale, oil or grease.

• Shake well before use
• Read weber technical data sheet for mixing ratio based on different application usage

ready to use, multi-function, synthetic latex admixture, suitable for a variety of building applications.

• As some solid matter in webermix GT mix I may settle during storage, it is essential to stir well before use in temperature lower than 4°C

• Allow adhesive bed to set, usually 24 – 48 hours before grouting commences. Joints must be dry and free of contaminants ie.