Share:
** Note:
*Please Whatsapp us for building materials or bulk order, we will provide special offer for you. Thank you
*Please Whatsapp us for building materials or bulk order, we will provide special offer for you. Thank you
Specifications
SKU: SUPER SEAL
Weight(grams): 20000
Dimension: 20 cm (Length) x 12 cm (Width) x 20 cm (Height)
- Stir weberprim super seal well, before use. This is particularly important when using weberprim super seal (matt). No further dilution is required.
- Surfaces to be treated with weberprim super seal must be dry, sound and free of contamination eg. grease, oil, dust, laitance etc.
- Apply weberprim super seal evenly with a brush or roller. Ensure that thin even coats are applied; rather than thick or lumpy coats.
- Usually weberprim super seal can be applied as a single coat treatment. However, certain materials may require two (2) coats of sealing for better result.
- Should a Second Coat is required, allow First Coat to Touch Dry usually within 2 - 4 hours (will vary dependant on weather & porosity of materials); before applying the Second Coat in similar manner.
- The Second Coat must be applied wet on wet; before First Coat dries out or fully cure.
- The level of gloss or matt-gloss achieved may vary depending on nature of materials (ie. porosity, surface texture etc.) to be treated and number of treatment coats applied.
- Preliminary testing on small trial areas is important to determine coverage and compatibility of weberprim super seal with the materials to be treated.
- Do not apply on damp or wet surfaces. Avoid application during wet weather conditions & onto materials that are extremely hot. weberprim super seal applied on damp or wet surfaces are likely to
flake, peel or whitened in time. - Allow to cure 24 hours (preferably longer) before subjected to light traffic.
Inquiry - Weberprim super seal
view more about
WEBER
