POWER TOOLS

View area : 94 x 37mm/100 x 50mm
Filter size : 110 x 90 x 9mm
Light shade state : DIN4
Dark shade state : Variable DIN9-13
Sensitivity control : Low to high stepless adjustment
Delay time control : Fast to slow stepless adjustment
Grinding function : Yes
ADF self-check : Yes
Low battery

View area : 94 x 37mm/100 x 50mm
Filter size : 110 x 90 x 9mm
Light shade state : DIN4
Dark shade state : Variable DIN9-13
Sensitivity control : Low to high stepless adjustment
Delay time control : Fast to slow stepless adjustment
Grinding function : Yes
ADF self-check : Yes
Low battery

View area : 94 x 37mm/100 x 50mm
Filter size : 110 x 90 x 9mm
Light shade state : DIN4
Dark shade state : Variable DIN9-13
Sensitivity control : Low to high stepless adjustment
Delay time control : Fast to slow stepless adjustment
Grinding function : Yes
ADF self-check : Yes
Low battery

View area : 94 x 37mm/100 x 50mment
Filter size : 110 x 90 x 9mm
Light shade state : DIN4
Dark shade state : Variable DIN9-13
Sensitivity control : Low to high stepless adjustm
Delay time control : Fast to slow stepless adjustment
Grinding function : Yes
ADF self-check : Yes
Low battery

View area : 94 x 37mm/100 x 50mment
Filter size : 110 x 90 x 9mm
Light shade state : DIN4
Dark shade state : Variable DIN9-13
Sensitivity control : Low to high stepless adjustm
Delay time control : Fast to slow stepless adjustment
Grinding function : Yes
ADF self-check : Yes
Low battery

• 100% Original branded !
• 100% Satisfaction Guarantee !
• 100% Buy with confidrfuence !
• ACT FAST ! READY STOCK !
• 100% Brand new and in good condition.

PRODUCT DESCRIPTION
- The range of Dinse Plug and sockets has a postive locking connection, to prevent accidental disconnection and good external insulation to prevent water penetrating the joint 
- Dinse compatible panel sockets and machine/ surface mounted plugs and sockets also available 

FEATURES & BENEFITS
- Positive locking

PRODUCT DESCRIPTION
- The range of Dinse Plug and sockets has a positive locking connection, to prevent accidental disconnection and good external insulation to prevent water penetrating the joint 
- Dinse compatible panel sockets and machine/ surface mounted plugs and sockets also available 
 
FEATURES & BENEFITS
- Positive

PRODUCT DESCRIPTIONS ️
- Contact tips are one of the most frequently replaced components of a MIG gun.

DESCRIPTIONS
- Brass Welding Nozzles can be a better choice for spatter resistance, if you're working with lower amperages, between 100 and 300amps.
- They're also the most affordable.

FEATURES
- These contact tips are either copper (E-CU) or copper chrome zirconium (CuCrZr).
- The function of the contact tip is to transfer the welding current to the wire as it passes through to create the arc.
- The wire should feed through with minimal resistance, while still maintaining electrical contact.

FEATURES
- A gas diffuser for a welding gun in which atmospheric air in the interior of the liner is substantially prevented from entering the contact tip hole.

FEATURES
- Brass welding nozzles can be a better choice for spatter resistance if you're working with lower amperages, between 100 and 300 amps. 
- They're also the most affordable.
- Beware, though, that brass nozzles can fail in high-hat situations and even potentially shatter.

PLASMA CUTTING TORCH SG55
SHIELD CUP

Features:

◆ High quality and long service life.

◆ Less rough selvedge.

◆ Excellent heat resistance, corrosion resistance, hardness.
 

PRODUCT DESCRIPTIONS
- Plasma electrode is to provide power to plasma arc, connecting to the negative output from the power supply.
- It is also use to conduct high voltage (aka, high frequency) energy during the starting sequence, adding energy to ionize the cutting gas, thus allowing the plasma arc to start.

FEATURES 
▪️  Roller guide wheel 
- The range and tightness can be adjust according to the size of the welding clamp head

▪️  Cutting Roller guide wheel 
- The surface adopts brass plating process not easy to rust , corrosion resistant

SPECIFICATIONS
- Brand : Bossman 
- Model : BP80MR

FEATURES 
- Strong uniformity 
- High quality material
- Precision quality of real material 
- Stable structure and mature technology
 
SPECIFICATIONS
- Brand : Bossman 
- Model : BT26C16
- Size : 1.

FEATURES
- Strong uniformity 
- High quality material 
- Precision quality of real material 
- Stable structure and mature technology
 
SPECIFICATIONS
- Brand : Bossman 
- Model : BT26CB24 
- Size : 2.

- Plasma cutting is a process that cuts through electrically conductive materials by means of an accelerated jet of hot plasma. 

- Typical materials cut with a plasma torch include steel, stainless steel, aluminum, brass and copper, although other conductive metals may be cut as well.

- Plasma cutting is a process that cuts through electrically conductive materials by means of an accelerated jet of hot plasma. 
- Typical materials cut with a plasma torch include steel, stainless steel, aluminum, brass and copper, although other conductive metals may be cut as well.

PRODUCT DESCRIPTIONS 
- TIG welding is a process that uses non-consumable tungsten.
- In this method, heating is done by placing an arc between a tungsten electrode and the workpiece.
- Welders use this procedure with shielding gas and may or may not use filler metals.