MAPEI

Improved adhesion cementitious adhesive with no vertical slip and extended open time, for ceramic tiles and stone materials.

Specifications

SKU: mapei 223

TECHNICAL CHARACTERISTICS
Planiseal 233 Plus is a two-component mortar, composed of a fiber-reinforced, cement-based compund, selected graded aggregates, special additives and synthetic polymers in water dispersion, blended according to a formula developed in the MAPEI research laboratories.

Description 

Novoplan 21 is used for levelling and smoothing new or existing substrates and provides an underlayment for receiving PVC, linoleum, rubber, cork, textile and non-woven flooring in areas where a good resistance to loads and traffic in of fices and public areas is required. Novoplan 21 must only be used in interior conditions in thicknesses from 1 to 5 mm.

Description 

Mapefix PE SF is an adhesive for chemical anchoring metal bars in holes made in building materials. It is a two-component, styrene-free product made from a mixture of polyester resins.

Where To Use 
Recommended for filling of voids and cavities in anchoring and concrete repair applications and for bearing pads.

Description 

Mapegrout Patch 218 is composed of cement, graded aggregates, special additives and synthetic fibres in a formula developed in the MAPEI research laboratories. 

Features 

• Fibre-reinforced shrinkage-controlled patch repair mortar.

Where To Use 

Waterproofing of cementitious substrates: 

• Bathrooms & toilets.. 
• Kitchen & washing areas.. 
• Balconies & terraces.. 
• Planter boxes.. 
• Gutters.. 
• Fishponds & water features..

Where To Use 

To form waterproofing layers before applying ceramic, stone and mosaic coatings in: 

• Balconies and terraces. 
• Bathrooms and shower cubicles. 
• Laundry rooms. 
• Saunas and damp environments in general..

Where To Use 

Applied in slurry form to waterproof concrete and cement mortar surfaces. Also used as a smoothing and waterproofing compound for underground walls before laying pre-formed membranes. 

Advantages 

• Vapour-permeable can be applied on damp substrates.

Where To Use 

Mapeflex MS45 has been specifically developed for sealing expansion, fillet and distribution joints on horizontal and vertical surfaces. It is also recommended to form internal and external flexible bonds between similar and dissimilar materials commonly used in the building industry and to replace or integrate mechanical fasteners.

Where To Use 

Multi-purpose, ready-to-use primer for internal and external floors and walls. Eco Prim Grip may be used to improve the bond of all types of cement, gypsum and lime-based plasters on substrates made from concrete, brickwork, vibro-compressed concrete blocks, lightweight blocks and gypsum.

Where to use
Mapeflex AC-P is used to seal internal and external expansion and construction joints subjected to a medium amount of movement and surface cracks in all types of absorbent building materials.

Description

• Mapeband Easy is made from a central core of vapor proof and waterproof elastic rubber sandwiched between two layers of alkali-resistant, non-woven polypropylene fabric.
• Mapeband Easy is elastic and deformable and has a series of holes along the edges to improving wetting with the waterproofing product applied.

Advantages 

• Factory-batched for consistent performance.. 
• Good workability.. 
• Creamy consistency for easy trowellability.. 
• Vertical tile installations with no slippage.. 
• Tiles are adjustable up to 15 mins after application (depending on ambient conditions).

Description 

Repairing and waterproofing underground masonry subject to water and moisture seepage in situations with a counter-pressure up to 1 atmosphere. Waterproofing basins, reservoirs, concrete or masonry tanks. As smoothing and waterproofing compound for underground walls before laying bituminous membrane.

water, dependent on the colour Consistency of mix Fluid Paste The density of the mix (kg/m³) 1,980 pH of mix approx.

Aquaflex Roof 77

Ready-to-use, flexible, liquid-applied membrane for seamless waterproofing of exposed surfaces.

Fuga Fresca is a ready-to-use paint for internal areas which is quickly and easily applied to rejuvenate, refresh and modify the colour of cementitious grout joints between tiles.