Bostik

Product details of BOSTIK WALL FILL A GAP CLASSIC SILICONE HIGH BOND STRENGTH CAN BE OVERPAINTED WITH ACRYLIC PAINT A326 - WHITE 450G

• Bostik A326 FILL A GAP CLASSIC is a general-purpose one-part water-based, paintable acrylic gap filler. This easy to use, economical sealant provides excellent adhesion for gaps and low movement joints.

Description 

Hydroment 408 is a general-purpose acrylic mortar strengthening additive specially formulated to improve the performance of ceramic tile grout, ceramic tile adhesive and etc. This product is suitable for interior and exterior use.

Description 

Supercoat EX is a single component acrylic flexible waterproofing coating that cures into a tough elastic waterproofing film. 

Features 

• Water-based, environmentally friendly.
• Ability to bridge cracks.
• Can be tiled over successfully.

Description 

Supercoat EX is a single component acrylic flexible waterproofing coating that cures into a tough elastic waterproofing film. 

Features 

• Water-based, environmentally friendly.
• Ability to bridge cracks.
• Can be tiled over successfully.

Description 

Superfix MY is a high strength cement based adhesive for floor and wall tiles applications. It is suitable to use on concrete, cement render, screeds, fibrous cement board and bostik approved waterprrofing membrane. Ideal for internal and external applications.

Description 

Boskim Base is a based coat cementitious filling and levelling plaster for concrete surfaces. It is used as a thin plaster for levelling and finishing the uneven surfaces.
Boskim Base consists of finely crushed white marble/ dolomite, cement, fine graded silica sand aggregates and Boskim aid which consist of alkali resistant additives.

Description 

• Boskim Base is a based coat cementitious filling and levelling plaster for concrete surfaces. It is used as a thin plaster for levelling and finishing the uneven surfaces.
• Boskim Base consists of finely crushed white marble/ dolomite, cement, fine graded silica sand aggregates and Boskim aid which consist of alkali resistant additives.

Description 

• Boskim Finish is polymer-modified cementitious filling and leveling plaster for concrete surfaces. It is used as a thin plaster to smoothen and repair minor surface imperfections.
• Boskim is a two-coat system consisting Boskim Base as a base coat and Boskim Finish as a finishing coat.

Description 

• Boskim Finish is polymer-modified cementitious filling and leveling plaster for concrete surfaces. It is used as a thin plaster to smoothen and repair minor surface imperfections.
• Boskim is a two-coat system consisting Boskim Base as a base coat and Boskim Finish as a finishing coat.

Description
Bostik Dry Tile Grout is a specially formulated color grout for filling joints between tiles and natural stone. It is made by select grades of UV-stable pigments, proprietary additives and polymers, portland cement, and graded aggregates as in the case of tile joint filler (sanded color grout).

Description
Flowfill Grout GP MY is a multi-purpose non-shrink Class-A cementitious grout. It is based on portland cement, graded aggregate, and chemical additives, which impart controlled expansion whilst in the plastic state. The gaseous expansion system compensates for shrinkage and settlement in the plastic state.

Boscoseal RC2 is a single component acrylic flexible waterproofing coating that cures into a tough elastic waterproofing film.
 

Recommended Uses 

Designed as exposed waterproofing membrane to flat and pitched roof for residential & commercial structures, to terminate around pipes, conduits and for continuity of sheet membranes onto parapet walls etc.

Excelcoat 100 is one component of water-based modified Polyurethane liquid applied to a waterproofing membrane. After curing it provides a tough, highly elastomeric, impervious barrier to moisture. Suitable for application by brush, roller, or trowel.

Bostik Fireban® One is a fire-rated intumescent, low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough, flexible fire-rated seal capable of cyclic expansion and compression movement of 50% (± 25%) of the original installed joint width.

Description 

Supercoat Fiber is a one-part water-based acrylic polymer fiber-reinforced waterproofing membrane. It is specially formulated for commercial and residential internal and external waterproofing applications. Low in odor, it is well suited to internal use. It offers excellent rolling ability and easy application by brush or roller.

Description 

Supercoat Fiber is a one-part water-based acrylic polymer fiber-reinforced waterproofing membrane. It is specially formulated for commercial and residential internal and external waterproofing applications. Low in odor, it is well suited to internal use. It offers excellent rolling ability and easy application by brush or roller.