Plastering Cement

Mix thoroughly with appropriate amount of water by using an electrical mixer.
Mixing time is 3 - 5 minutes.
Allow mixture to stand for 10 minutes for additives to dissolve.
stir again the mixture and ready to apply
Apply with steel trowel or spatula
When applying several layers, the layer underneath must be dried before spreading the subsequent layer.

• Remove loose particles, grease and traces of foreign materials, on a dry absorbent surface, surface is moistened if necessary
• mixing time of 3-7 minutes depending on the type of mixing equipment.
• Application can be done by hand and machine.
• Final surface can either be smoothened or sponge-finished..

It is a cement-based and water resistant plaster which can be used in interior and exterior conditions. It has water resistant properties and is also applicable for patching concrete as well as a masonry joint mortar for bed thickness of 5 - 15 mm.  

Specially formulated for the replacement of conventional site-mixed cement/sand plaster.

• Remove loose particles, grease and traces of foreign materials, on a dry absorbent surface, surface is moistened if necessary
• mixing time of 3-7 minutes depending on the type of mixing equipment.
• Application can be done by hand and machine.
• For smooth final finish, thin plaster are recommended on top of E.MIX EASI RENDER.

• Remove loose particles, grease and traces of foreign materials, on a dry absorbent surface, surface is moistened if necessary
• mixing time of 3-7 minutes depending on the type of mixing equipment.
• Application can be done by hand and machine.
• Final surface can either be smoothened or sponge-finished..

QuickMix™ QuickPlast™ (399) is a top-quality plastering cement specially designed for application on brick walls and block walls. Its water retention property prevents premature loss of water and ensures sufficient moisture is retained for the complete cement hydration process.