CIMENT GROUT

Weberfloor Colour Cement is used as a coloured topping coat to colour and enhance the appearance of plain concrete/cement-sand by mixing 1 part (25 kg) Weberfloor Colour Cement to 3 part (75 kg) silica sand to 1 part (16L) water. It is suitable as a gap filler to point joints of ceramic tiles, etc.

• New concrete should be cured for at least 28 days and should have a pull off strength ≥ 1.5 N/mm².
•  Cement or mineral based substrates must be prepared mechanically using abrasive blast cleaning or scarifying equipment to remove cement laitance and to achieve an open textured surface.

wo-component with latex cementitious coating, which can be simply achieved by mixing a prepacked powder with a formulated admixture, and subsequent painting the slurry on various substrates. It protects a wide range of buildings and structural concrete components with excellent resistance to water, long-term weathering and scratching.

• Concrete, Cement-Sand Render / Screed & Masonry surface must be fully cured, dry, sound, flat or true & free of contaminants eg. grease, oil, dust, loose particles, laitance etc.
• Steel / Metal surface must be free of scales, rust, grease, oil etc.
• Damp the surface before coating and sweep the excess water to avoid ponding on the horizontal area.

• The substrate should be clean and sound. Free from any contamination including oil, grease, laitance and dust. For maximum bonding, the surface should be roughened and dampen with clean water.
• Immediately prior to grouting remove free standing water.
• Metal surface must be free from rust, scale, oil or grease.