TILE ADHESIVE, WEBER

ready to use, multi-function, synthetic latex admixture, suitable for a variety of building applications.

• As some solid matter in webermix GT mix I may settle during storage, it is essential to stir well before use in temperature lower than 4°C

• Allow adhesive bed to set, usually 24 – 48 hours before grouting commences. Joints must be dry and free of contaminants ie.

• Surface Preparation : Surface to receive tiles must be well cured, dry, sound and free of contamination. When fixing onto building boards, a surface primer ie. webermix SBR is required
• Mixing : webermix admix I is ready to use; therefore does not required further addition of water. Add cement-based tile adhesive into webermix admix I.

• Substrate must be dry, sound, flat / true & free of contaminants.
• Ceramic Tiles are to be fix dry. Do not soak in water.
• Mix weberset super star with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.

• Substrate must be dry, sound, flat / true & free of contaminants.
• Ceramic Tiles are to be fix dry. Do not soak in water.
• Mix weberset x'tra flex (LD) with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.

• Substrate must be dry, sound, flat / true & free of contaminants.
• Ceramic Tiles are to be fix dry. Do not soak in water.
• Mix weberset eco fix with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.

• Substrate must be dry, sound, flat / true & free of contaminants.
• Ceramic Tiles are to be fix dry. Do not soak in water.
• Mix weberset eco flex with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.

• Substrate must be dry, sound, flat / true & free of contaminants.
• Ceramic Tiles are to be fix dry. Do not soak in water.
• Mix weberset quickfix with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.